Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Country of Origin | India |
Application | Industrial Use |
Control | Computer Monitoring |
Location | Worldwide |
The shunts are designed & manufactured to comply with the requirements of IS1248 / DIN43703 & DIN43780. The shunt provides an accurate d .c. millivolt signal, exactly proportional to the measuring current.
The best performance is guaranteed if the following points are observed.
1) Shunts may be mounted horizontally or vertically. Horizontal mounting gives the best heat dissipation.
2) Utilize the full end block surface area. 3) Ample ventilation should be p rovided. 4) Busbar should be adequately rated, cleaned & coated with a thin layer of silicon grease between the contact surfaces.
5) Bolts and nuts must be carefully tightened.
Caution :Shunts are not insulated & protection against accidental contact may be necessary in order to comply with Health & Safety regulations.
©2023. Automatic Electric. All Rights Reserved.