Panel Meter,Transformer,Voltage Regulator/ stabilizer,Rectifier,Transducer,Break down tester,Test Bench,Relay test kit,Energy saver,Test measuring instruments Panel Meter,Transformer,Voltage Regulator/ stabilizer,Rectifier,Transducer,Break down tester,Test Bench,Relay test kit,Energy saver,Test measuring instruments

All Panel Meter,Transformer,Voltage Regulator/ stabilizer,Rectifier,Transducer,Break down tester,Test Bench,Relay test kit,Energy saver,Test measuring instruments Panel Meter,Transformer,Voltage Regulator/ stabilizer,Rectifier,Transducer,Break down tester,Test Bench,Relay test kit,Energy saver,Test measuring instruments

High Tension Resin cast Indoor Current Transformers
Panel Meter,Transformer,Voltage Regulator/ stabilizer,Rectifier,Transducer,Break down tester,Test Bench,Relay test kit,Energy saver,Test measuring instruments
  Panel Meter,Transformer,Voltage Regulator/ stabilizer,Rectifier,Transducer,Break down tester,Test Bench,Relay test kit,Energy saver,Test measuring instruments  Documentation
  Panel Meter,Transformer,Voltage Regulator/ stabilizer,Rectifier,Transducer,Break down tester,Test Bench,Relay test kit,Energy saver,Test measuring instruments Software
  Panel Meter,Transformer,Voltage Regulator/ stabilizer,Rectifier,Transducer,Break down tester,Test Bench,Relay test kit,Energy saver,Test measuring instruments  Send Enquiry

DESCRIPTION

Direct measurement of Current in high voltage system is not possible because of insulation problem of measuring instruments. It is also not possible to use current flowing through the system directly for protection purpose due to its high value and high insulation problem. In such conditions Current Transformers are used.


BASIC FUNCTIONS OF CURENT TRANSFORMERS ARE
To reduce the line current to a value which is suitable for standard measuring instruments, relays etc.
To isolate the Measuring Instruments, Meters, Relays etc. from high voltage side of an installation.
To protect Measuring Instruments against short circuit currents.
To sense abnormalities in current & give current signals to protective relays to isolate the defective system.

FEATURES

The transformers are vacuum encapsulated in epoxy resin, which ensures faultless insulation. Incombustible high-class raw material, together with uniform cast resin bodies, gives the current transformers a high mechanical & electrical strength that requires no maintenance. It is advisable to protect the transformers from direct sunlight & access to dust.


ELECTRICAL SPECIFICATIONS
TYPE Wound & Ring type
OPERATING VOLTAGE 1.1kV, 2.2kV, 3.3kV, 6.6kV, 11kV, 22kV, 33kV.
PRIMARY CURRENT Upto 2500 Amps. In Wound Type
From 300A to 3000A in Ring Type
SECONDARY CURRENT 5A & 1A (Others on Request)
SHORT TIME THERMAL CURRENT
& IT'S DURATION
Upto 40kA for 1 second (Others on Request)
RATED BURDEN 5,10,15,20, and 30VA (Others on Request)
ACCURACY CLASS 0.2, 0.5, 1.0, 5P10, 5P15.
    (For differential protection, REF protection, Bus Bar
    protection, CT with accuracy class PS can be offered.)
FREQUENCY 50Hz.
OPERATING TEMP. -10C to 40C.
CONFORMS TO I.E.C. 185, I.E.C. 44-1, IS 2705.

MECHANICAL CONSTRUCTION
Panel Meter,Transformer,Voltage Regulator/ stabilizer,Rectifier,Transducer,Break down tester,Test Bench,Relay test kit,Energy saver,Test measuring instruments
Fig.No. - Wound Type
Panel Meter,Transformer,Voltage Regulator/ stabilizer,Rectifier,Transducer,Break down tester,Test Bench,Relay test kit,Energy saver,Test measuring instruments
Fig. No. - Ring Type

Ordering information
While ordering mention all the Electrical Specification required.

Note : for class PS accuracy, please specify formula for knee-point voltage for design optimisation
Copyright 2010-2011 Automatic IT Services Pvt. Ltd. All Rights Reserved.